Updated November 2026
A Hario V60 pour over coffee maker is a simple cone-shaped dripper that lets you control every variable in your brew, from grind size to water flow. With a gooch-style filter, a steady kettle and a scale, you can make a clean, balanced cup in about three to four minutes. This guide walks through the gear, the measurements, the pouring sequence and the mistakes that most often cause bitter or weak results with the hario v60 pour over coffee maker.
What Makes the Hario V60 Different
The V60 is a conical dripper with a single large hole at the bottom and spiral ridges inside the cone. Those ridges keep the filter from sealing against the walls, so water and air can move through the coffee bed freely. Compared with flat-bottom brewers, the V60 tends to rewards precise pouring, since a faster or slower flow changes how long the water stays in contact with the grounds. If you want a broader comparison of cone, flat-bottom and carafe designs, see Pour Over Coffee Makers: Cone, Flat-Bottom and Carafe Brewers Compared.
Shopping for one? See our guide: 6 Best Coffee Maker Pours Over (2026): Our Picks.
The V60 comes in plastic, ceramic, glass and metal versions. Materials affect heat retention more than flavor, so pick the one that suits your counter and how often you plan to use it.
Gear You Need Before You Start
- A Hario V60 dripper in size 01 (for one to two cups) or 02 (for two to four cups)
- Paper filters matched to your dripper size
- A digital scale that reads to 0.1 gram
- A gooseneck kettle for controlled pouring
- A burr grinder set to a medium-fine grind
- A carafe or mug to receive the brew
- A timer, which can be your phone
Other brewers have their own tradeoffs. For a look at how the V60 stacks up against the Chemex and similar options, check Drip Coffee Maker Pour Over: 7 Best Picks for Every Brewer (2026).
Choosing Your Coffee Dose and Ratio
A common starting point is a ratio of 1:15 to 1:17, meaning 15 to 17 grams of water for every gram of coffee. For a single 300-gram cup, that works out to roughly 18 to 20 grams of ground coffee. Many home brewers begin at 1:16, then adjust. A stronger cup comes from a lower ratio (more coffee per water), and a lighter cup from a higher one.
| Cups | Coffee (grams) | Water (grams) | Filter size |
|---|---|---|---|
| 1 cup | 15 g | 240 g | 01 |
| 2 cups | 24 g | 384 g | 01 or 02 |
| 3 to 4 cups | 36 g | 576 g | 02 |
Grind Size and Water Temperature
A medium-fine grind, somewhere near table salt, is a reliable starting point for the V60. Grind too fine and the water slows down, which can over-extract the coffee and taste bitter. Grind too coarse and the water rushes through, leaving the cup thin and sour. Adjust one notch at a time and taste before changing anything else.
Most specialty guides suggest water between about 195°F and 205°F (90°C to 96°C). Lighter roasts usually benefit from the hotter end, while darker roasts can be brewed a little cooler. If your kettle has no temperature setting, let boiled water sit for 30 to 45 seconds before pouring.
Step-by-Step Brewing Method
Step 1: Prepare the Filter
Fold the paper filter along its seam and place it in the dripper. Rinse it with hot water to remove the papery taste and to warm the dripper and carafe. Discard the rinse water.
Step 2: Add the Grounds
Place the dripper on your carafe or mug, add the ground coffee, and gently level the bed by tapping or shaking the dripper. Tare your scale with everything on it.
Step 3: Bloom the Coffee
Pour about twice the coffee weight in water (around 40 grams for 20 grams of coffee) in slow circles, saturating all the grounds. Wait 30 to 45 seconds. The released gas makes the bed rise and puff, which helps even extraction. Read more about this stage in The Coffee Bloom in Pour Over: Why and How to Do It.
Step 4: Pour in Stages
Pour the remaining water in two or three pulses, keeping the water level low and steady. Aim to reach your total water weight at around the two-and-a-half to three-minute mark. Keep the stream away from the filter wall and avoid pouring directly onto the paper.
Step 5: Let It Drain and Serve
Allow the dripper to finish draining. If the total time is under two minutes, try a finer grind next time. If it runs past four minutes, go coarser.
Dialing In Your Recipe
Treat your first few brews as tests. Change only one variable at a time: grind size, ratio, or water temperature. If the cup tastes sour and thin, extract more by grinding finer, pouring slower or using hotter water. If it tastes harsh or dry, reduce extraction by going coarser or pouring faster. Keep brief notes so you can repeat a good cup.
Common Mistakes
- Skipping the filter rinse, which leaves a papery flavor
- Using stale coffee, since flavor fades within weeks of roasting
- Pouring too fast, which shortens contact and weakens the cup
- Letting the grounds dry out during the brew by pouring from too high
- Grinding with blade grinders, which produce uneven particles and inconsistent results
- Failing to clean the dripper, leaving oils that go rancid
Tips for Consistent Cups
- Weigh everything, including water, to repeat results
- Keep your kettle at a steady temperature
- Store beans in an airtight container away from heat and light
- Rinse and dry the dripper after each use, and wash it with warm water and mild soap as needed
Recommended gear
A digital scale is the single most useful accessory for repeatable results. It lets you control ratio and track brew time, so changes you make are measurable.
A gooseneck kettle gives you precise control over the water stream, which matters during the bloom and the pulse pours.
A burr grinder produces even particles, which reduces the uneven extraction that causes sourness and bitterness in pour over. For selection advice, see How to Choose a Coffee Grinder for Espresso, Pour Over or French Press.
Paper filters designed for the V60 match its geometry, which helps keep flow rate predictable.
FAQ
Is the Hario V60 good for beginners?
Yes. The basic method is simple, but the results depend on pouring technique and grind size, so expect a few practice brews before the cups feel consistent.
What size V60 should I buy?
Size 01 suits one to two cups, while size 02 is better for two to four cups. Use filters that match the dripper size.
Do I need a gooseneck kettle?
It is not strictly required, but a gooseneck makes controlled, steady pours much easier. A regular kettle can work if you pour slowly.
Why is my V60 coffee bitter?
Bitterness usually means over-extraction, often from grinding too fine, using water that is too hot or pouring too slowly. Try a coarser grind first.
Why is my V60 coffee sour?
Sourness usually signals under-extraction. Grind a bit finer, pour more slowly, or use slightly hotter water.
Should I use bleached or unbleached filters?
Either works. Rinsing the filter well with hot water removes most of the papery taste regardless of type.
How often should I clean my V60?
Rinse it after every use and wash it with warm water and mild soap regularly to remove coffee oils. Dry it fully before storing. If you notice mineral buildup on other equipment in your kitchen, see Use White Vinegar to Clean Coffee Maker: 5 Best Descalers Compared (2026) for descaling options.
Conclusion
The Hario V60 rewards careful measuring and steady pouring more than any special equipment. Start with a 1:16 ratio, a medium-fine grind and water around 200°F, then adjust one variable at a time. Keep notes, and your cups will become more consistent with each brew.

