Updated November 2026

The breville barista express espresso machine bes870xl brushed stainless steel is a semi-automatic machine that combines an integrated conical burr grinder with a manual group head and steam wand. By the end of this guide, you will know how to unbox and prime the machine, grind and dose correctly, pull a balanced shot, texture milk, and keep the unit clean so it lasts. Most of the learning curve is in grind size, and that is where we will spend the most time.

What the BES870XL Does Differently

The BES870XL is the brushed stainless steel finish of the Barista Express line. Under the surface, it has a 15-bar pump, a thermocoil heating system, a built-in conical burr grinder with adjustable grind size, a pressure gauge, and a steam wand with a manual microfoam valve. The grinder has a hopper that holds roughly half a pound of beans, and the portafilter accepts a 54 mm basket.

Because the grinder is built in, you control the full chain from bean to cup. That is the appeal for many buyers, and it is also why the machine asks more of you than a single-serve pod brewer. If you want a broader comparison of models in this family, see 7 Best Breville Barista Express Impress Espresso Machine Options (2026) and Breville Barista Express Espresso Machine Review: Features and Performance.

Before You Brew: Setup Checklist

Good shots start before the first pull. Work through this list once when the machine arrives.

  1. Remove all packaging, including the foam inside the bean hopper and the plastic film on the drip tray.
  2. Rinse the water tank, fill it with cold, filtered water, and place it back on the base.
  3. Decide whether you will use the included water filter. If you do, soak it as directed by the manufacturer before installing it.
  4. Set the machine on a level counter with at least a few inches of clearance above for steam and heat.
  5. Run a full water cycle through the group head without a portafilter to flush the system.
  6. Fill the hopper with fresh whole beans. Stale beans cause more problems than any other single factor.

Tools You Will Need

  • A digital scale that reads to 0.1 gram
  • A tamper that fits a 54 mm basket, ideally a flat-bottomed tamper
  • A stainless steel milk pitcher, roughly 12 to 20 ounces
  • A thermometer or the habit of feeling the pitcher with your hand
  • A knock box or a small bin for spent pucks
  • A cleaning brush and a microfiber cloth

Step 1: Grind and Dose

Start with the grinder setting. The BES870XL uses a dial on the front of the grinder, and the default position is a reasonable starting point for most medium-roast beans. Espresso is sensitive to grind size, so change one thing at a time.

  • Dose: Use about 18 to 19 grams for a double shot in a standard 54 mm basket. Many owners find that a slightly heavier dose tightens the puck and slows the shot.
  • Grind: Grind directly into the portafilter. Do not pre-grind and transfer.
  • Distribute: Tap the sides of the portafilter lightly, or use a distribution tool, to level the grounds.
  • Tamp: Press straight down with about 15 to 20 pounds of pressure. Keep the tamper level, and polish the puck surface with a light twist.

Dialing In: Finding the Right Grind

Dialing in means adjusting the grind until the shot runs at the right speed and tastes balanced. Use this process:

  1. Pull a double shot with your current setting and time it from start to finish.
  2. Aim for roughly 25 to 30 seconds, yielding about 36 to 40 grams of liquid from 18 to 19 grams of dry coffee. Many baristas use a ratio around 1:2, though taste should decide.
  3. If the shot runs under about 20 seconds and tastes sour or thin, grind finer.
  4. If it runs over about 35 seconds and tastes bitter or harsh, grind coarser.
  5. Make one small adjustment at a time and pull another shot before changing anything else.
Symptom Likely Cause Adjustment
Shot runs in under 20 seconds, tastes sour Grind too coarse or dose too low Grind finer
Shot runs over 35 seconds, tastes bitter Grind too fine or tamp too hard Grind coarser
Channeling, uneven flow from the basket Poor distribution or uneven tamp Improve distribution, retamp level
Watery, weak shot Coarse grind or old beans Grind finer, use fresher beans

Step 2: Pull the Shot

Lock the portafilter into the group head and place your cup on the drip tray. Press the single or double shot button. Watch the first few seconds: a shot should begin as a thin, steady stream that thickens into a honey-like flow. Stop the shot when the flow turns pale or blonde, which signals water running through the puck with little coffee left to extract.

Step 3: Steam and Texture Milk

The steam wand is where many first-time owners struggle. Follow this sequence for smooth microfoam.

  1. Purge the wand briefly before placing it in milk to clear any condensed water.
  2. Fill the pitcher with cold milk to just below the spout. Whole milk is the easiest to texture, though many oat and soy milks now have barista versions.
  3. Place the tip just below the surface, slightly off-center, to create a whirlpool.
  4. Introduce air for a few seconds, then lower the pitcher slightly so the tip stays submerged while the milk spins.
  5. Stop when the pitcher feels hot to the touch, around 140 to 160 degrees Fahrenheit.
  6. Tap the pitcher on the counter, swirl to remove large bubbles, and pour.

Step 4: Clean and Maintain

Routine cleaning keeps shots tasting clean and protects the grinder and boiler.

Common Mistakes

  • Using stale beans. Beans lose their best character within weeks of roasting. Buy smaller bags more often.
  • Changing too many variables at once. Adjust grind, then dose, then tamp, one at a time.
  • Skipping the purge. Purging the steam wand and running a brief water flush before brewing removes residue and stabilizes temperature.
  • Overheating milk. Milk above about 160 degrees Fahrenheit tastes flat and scorched.
  • Neglecting descaling. Scale slows heating and can affect shot consistency.
  • Leaving the portafilter in the group head for long periods. Remove it after use to avoid residue buildup and gasket wear.

Tips for Better Results

  • Keep a simple log of grind setting, dose, time and taste notes for each bean bag.
  • Let the machine warm up fully before pulling your first shot of the day.
  • Store beans in an airtight container away from heat and light, and avoid the freezer for daily use.
  • Use filtered water with moderate mineral content for both flavor and scale control.
  • Practice milk texturing with a pitcher of water first to learn the feel of the wand.
  • Digital coffee scale: Weighing dose and yield is the fastest path to repeatable shots. View on Amazon
  • Espresso-specific cleaning tablets: Useful for backflushing and keeping group heads clean between sessions. View on Amazon
  • Stainless steel milk pitcher: A pitcher with a sharp spout helps control pours and makes latte art easier to attempt. View on Amazon
  • Espresso tamper: A flat, well-fitted tamper for a 54 mm basket helps produce level pucks. View on Amazon

FAQ

Is the BES870XL good for beginners?

It is a common choice for beginners who want to learn espresso fundamentals, because the grinder and pressure gauge give clear feedback. Expect a learning period of several weeks before shots and milk become consistent.

What grind setting should I start with?

Start with the default position and dial in from there. Medium-roast beans usually land in a middle range, but every bag behaves differently, so rely on shot timing and taste.

How much coffee should I use for a double shot?

Most owners start with about 18 to 19 grams in the standard basket and aim for roughly 36 to 40 grams of liquid out.

Why does my shot taste sour?

Sourness usually means under-extraction. Grind finer, check your dose, and make sure the puck is evenly distributed and tamped.

Why does my shot taste bitter?

Bitterness often points to over-extraction. Grind coarser, shorten the shot, or lighten the tamp pressure slightly.

How often should I descale?

Follow the manufacturer’s schedule and adjust for your water hardness. Hard water typically requires more frequent descaling.

Can I use oat milk for lattes?

Yes, though results vary by brand. Barista-formulated oat milks generally texture more reliably than standard versions.

Conclusion

The breville barista express espresso machine bes870xl brushed stainless steel rewards a methodical approach. Set up carefully, dial in your grind with one change at a time, and keep the machine clean and descaled. Once you find a setting that suits your favorite beans, shots become repeatable and milk drinks follow naturally.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our coffee machines guides, checking product details against manufacturer specifications and owner feedback.