Updated November 2026

The breville bes870xl coffee maker is a semi-automatic espresso machine with a built-in conical burr grinder, and getting good results from it comes down to a few habits: grinding fresh, dosing consistently, and keeping the machine clean. This guide walks you through the first setup, a repeatable brewing routine, and the maintenance that keeps shots tasting right. Once you have these basics down, the machine rewards you with cafe-style drinks at home.

Set Up the Machine Before Your First Shot

Start by rinsing the water tank, filling it with fresh cold water, and locking it into place. Remove the portafilter, insert the included stainless filter basket, and run a few water-only cycles through the group head to flush out manufacturing residue. Empty the drip tray as it fills during this process.

Shopping for one? See our guide: 5 Best Drip Coffee Maker Breville Models for Everyday Brewing (2026).

Next, check the grinder hopper. Fill it with whole beans and set the grind size. A medium-fine setting is a sensible starting point for most espresso beans, and you can adjust from there based on shot time.

Dial In Your Espresso Shot

Consistency matters more than any single setting. Use the same dose, tamp pressure and grind setting every time until you have a result you like, then change only one variable at a time.

  1. Grind directly into the portafilter using the dose setting you prefer, then level the grounds with a finger or a leveling tool.
  2. Tamp firmly and evenly, keeping the tamper level so the puck compresses without tilting.
  3. Lock the portafilter into the group head and place a pre-warmed cup underneath.
  4. Start the shot and time it. A common target is roughly 25 to 30 seconds for a double shot, though beans vary.
  5. If the shot runs too fast and tastes sour or thin, grind finer. If it runs too slow and tastes bitter or burnt, grind coarser.

Steaming milk works the same way: purge the steam wand briefly before use, submerge the tip just below the surface, and stop heating once the pitcher feels hot to the touch.

Maintain Brew Quality With Regular Cleaning

Old coffee oils and mineral scale are the two main reasons shots start tasting flat or bitter. Backflush the group head with a blank disc and cleaning detergent at the intervals the manual recommends, and rinse the portafilter and basket after every session. Wipe the steam wand immediately after each milk texturing session.

Descaling is equally important, especially in areas with hard water. Follow the manufacturer’s descaling procedure and use a descaling solution rated for espresso machines. If your water is very hard, consider using filtered water to slow scale buildup. For a broader overview of descaling options, see Use White Vinegar to Clean Coffee Maker: 5 Best Descalers Compared (2026).

Compare Your Options Before You Commit

The breville bes870xl coffee maker suits people who want to control every step of espresso preparation. If you prefer a simpler drip machine or want to brew a full pot for a household, a different style may fit better. The guide to Types of Coffee Makers: How Each One Brews and Who It Suits explains the tradeoffs. Breville’s grind-and-brew line also has its own setup logic, which is covered in Breville Grind Control Coffee Maker: Setup, Settings and Tips.

Common Mistakes to Avoid

  • Using stale or oily beans, which clog the grinder and produce uneven extraction.
  • Skipping the puck tamp or tamping unevenly, causing channeling and weak shots.
  • Changing grind size, dose and tamp all at once, making it impossible to know what helped.
  • Letting milk residue dry on the steam wand, which can clog the tip.
  • Ignoring descaling reminders, which can affect heating and flow over time.

A digital scale helps you weigh your dose and yield, making shots repeatable. View on Amazon

A small tamper that fits your portafilter diameter makes leveling and compressing the grounds more even. View on Amazon

A cleaning brush set helps you clear the grinder and group head between sessions. View on Amazon

FAQ

How fine should I grind for the breville bes870xl coffee maker?

Start around a medium-fine setting and adjust based on shot time. Finer grinds slow the shot, while coarser grinds speed it up.

How often should I clean the group head?

Rinse the portafilter after every use and backflush periodically according to the manual. Regular cleaning prevents oil buildup that affects flavor.

Do I need to descale the machine?

Yes, descale on the schedule the manufacturer recommends, more often if you have hard water. Consult the manual for the correct procedure before using any descaling product.

Conclusion

With a consistent dose, a steady tamp and a timed shot, the breville bes870xl coffee maker can produce very good espresso at home. Change one variable at a time, keep the grinder and group head clean, and descale on schedule. Those habits matter more than any single setting.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our coffee machines guides, checking product details against manufacturer specifications and owner feedback.