Updated November 2026
Repairing a Breville espresso machine usually comes down to replacing a worn seal, a cracked gasket or a tired vibration pump, and the right part matters as much as the right tool. The picks below were selected by reviewing product listings, model compatibility notes and common owner feedback about leaks, weak pressure and water that won’t stop dripping. Each item is matched to a specific repair so you can order the part that actually fixes your problem.
Our top picks at a glance
- 1
TOP CHOICEBest overallO-Rings Seal for Breville Espresso Machines BES900/920/980/990 (5 PcsView on Amazon - 2
TOP CHOICEBest for grouphead leaksEspresso Accessories: Breville Barista Express & Bambino Plus Grouphead Seal, 2-PackView on Amazon - 3
TOP CHOICEBest for water tank problemsSilicone Gaskets, Stainless Steel Screws, Plunger Valve, Reservoir DraView on Amazon - 4
Best for a large seal assortment17 Pack Pcs Set O-Rings Seal Kit Fit for Breville Espresso Machines BEView on Amazon - 5
Best for pressure lossEP5 EX5 EP5GW Vibration Pump Repair KitView on Amazon
Our Top Picks
| Product | Best for | Key feature |
|---|---|---|
| O-Rings Seal for Breville BES900/920/980/990 | General seal replacement | 5 large and 12 small rings |
| Breville Grouphead Seal, 2-Pack | Grouphead leaks | 54mm food-grade silicone gasket |
| Water Tank Bottom Connector Repair Kit | Water tank drainage issues | Gaskets, screws and plunger valve |
| 17 Pack O-Rings Seal Kit | Multiple seal replacements | Color-coded large and small sizes |
| EP5 EX5 EP5GW Vibration Pump Repair Kit | Weak pressure or pump noise | Pump component replacement set |
O-Rings Seal for Breville Espresso Machines BES900/920/980/990 (5 Pcs Large Size, 12 Pcs Small Size)
O-Rings Seal for Breville Espresso Machines BES900/920/980/990 (5 Pcs Large Size, 12 Pcs Small Size)
Best for: General seal replacement across several Breville models.
This set suits owners who want a single kit covering the common internal seals on the BES900, BES920, BES980 and BES990 lines.
Pros
- Covers both large and small seal sizes in one order
- Specifically listed for multiple Breville model numbers
Cons
- Fit should be checked against your exact model before installing
Espresso Accessories: Breville Barista Express & Bambino Plus Grouphead Seal, 2-Pack
Espresso Accessories: Breville Barista Express & Bambino Plus Grouphead Seal. Leak-Proof, Heat-Resistant Food-Grade Silicone 54mm Silicone Gasket for Breville Espresso Machine, 2-Pack
Best for: Grouphead leaks around the portafilter.
Owners noticing water seeping from the group area during brewing often find the grouphead gasket is the cause, and this 54mm silicone replacement is aimed at that spot.
Pros
- Food-grade silicone designed to handle brewing heat
- Two gaskets in one pack for a spare
Cons
- Limited to the grouphead area, so it won’t fix other leaks
Silicone Gaskets, Stainless Steel Screws, Plunger Valve, Reservoir Drainage System Repair Kit (2 Pack)
Silicone Gaskets, Stainless Steel Screws, Plunger Valve, Reservoir Drainage System, Manual Screwdriver Setup 2 Pack Espresso Machine Water Tank Bottom Connector Repair Kit
Best for: Water tank bottom connector and drainage problems.
This kit suits owners whose reservoir leaks from the base or drains poorly, since it bundles gaskets, screws and a plunger valve.
Pros
- Includes the screws and valve needed for a full connector rebuild
- Comes with a manual screwdriver setup
Cons
- Installation takes more time than a single seal swap
17 Pack Pcs Set O-Rings Seal Kit Fit for Breville Espresso Machines BES900 BES920 BES980 BES990
17 Pack Pcs Set O-Rings Seal Kit Fit for Breville Espresso Machines BES900 BES920 BES980 BES990 (5 Pcs Blue Large Size, 12 Pcs Red Small Size)
Best for: Replacing several worn seals during one repair session.
This larger assortment fits owners who expect more than one seal to need attention, or who want spares on hand.
Pros
- Color-coded large and small sizes make matching easier
- Good value for replacing several seals at once
Cons
- Many pieces are unused if only one seal is worn
EP5 EX5 EP5GW Vibration Pump Repair Kit
EP5 EX5 EP5GW Vibration Pump Repair Kit, Suitable for Sa-eco Bre-vil-le and Ph-ilips various models of coffee machines such
Best for: Weak pressure or a noisy pump.
Owners who notice thin shots or a buzzing pump may be dealing with a worn vibration pump, and this kit targets that component.
Pros
- Addresses pump-related pressure loss directly
- Listed for several EP5 and EX5 coffee machine models
Cons
- Compatibility is broader than Breville alone, so confirm the match
Buying Guide
Identify the failing part first
Drips from the grouphead point to a gasket, while leaks under the water tank usually point to the reservoir connector. Weak pressure or a loud pump suggests the vibration pump rather than a seal.
Check your model number
Breville part fit varies between the BES900, BES920, BES980 and BES990 lines. Match the listed model numbers to the label on your machine before ordering.
Decide between a single seal and a full kit
If one seal is clearly worn, a small pack is enough. If several seals are aging, a larger assortment saves a second order later.
Plan for descaling and cleaning
Mineral buildup accelerates seal wear, so descaling on schedule can extend the life of new parts.
Good picks for this: O-Rings Seal for Breville Espresso Machines BES900/920/980/990 and Grouphead Seal, 2-Pack
Related reading
- Sale Breville Espresso Machine: How to Spot a Real Deal (2026)
- How to Work a Breville Espresso Machine: A Step-by-Step Guide for Beginners
- How to Use Breville Espresso Machine: A Step-by-Step Guide for Beginners
- Descaling a Breville Espresso Machine: 5 Best Descalers Compared (2026)
- Decalcify Breville Espresso Machine: 7 Best Descalers Compared (2026)

