Updated November 2026

A vietnam drip coffee maker, usually called a phin, is a small metal filter that sits on top of your cup and slowly drips brewed coffee into it. You will learn how to set one up, how to measure grounds and water, and how to get a rich, syrupy cup that you can sweeten or serve over ice. The whole process takes about five minutes once you have the rhythm down.

What a Vietnam Drip Coffee Maker Is and How It Works

The phin has four parts: a cup-shaped base, a perforated chamber that holds the grounds, a press plate that sits on top of the grounds, and a lid. Hot water drains through the grounds by gravity alone, so there is no pump or electricity involved. Because the drip is slow, the coffee comes out concentrated, which is why it is traditionally poured over sweetened condensed milk or ice.

Shopping for one? See our guide: Drip Coffee Maker Pour Over: 7 Best Picks for Every Brewer (2026).

Unlike an automatic machine, a phin gives you direct control over grind size, dose, water temperature and drip speed. That makes it a good option for people who like to tweak their brew, and it is one reason the design is common in Vietnam and in households that want a simple, portable brewer.

Step-by-Step: Brewing Vietnamese Coffee in a Phin

Most home brewers start with a medium-fine to fine grind, roughly the texture of table salt. Coarser grounds drain too fast and taste weak. Here is the basic process:

  1. Add about 2 tablespoons (roughly 10 to 12 grams) of coffee to the chamber, then shake gently to level it.
  2. Set the press plate on top of the grounds and press lightly so it sits evenly.
  3. Pour in a small amount of hot water, around 20 to 30 ml, and let the grounds bloom for 30 seconds.
  4. Fill the chamber with more hot water, close the lid, and let it drip. A full brew typically takes 4 to 5 minutes.
  5. If you want it sweet, spoon 1 to 2 tablespoons of sweetened condensed milk into your cup before the brew finishes.
  6. Stir the coffee and milk together, then add ice if you want a cold drink.

Choosing Coffee, Grind and Water Temperature

Dark or medium-dark roasts with chicory are traditional, though many people now use plain dark roast beans. Freshly ground coffee makes a noticeable difference, and grind consistency matters more than the exact setting. Use water just off the boil, around 195 to 205°F, to avoid scorching the grounds.

Drink style Grind Water Sweetener
Hot, strong Fine Full brew, hot Optional
Iced, sweet Fine to medium-fine Slightly less water Condensed milk
Light, black Medium-fine Extra water after brew None

Keeping Your Phin Working Well

Rinse the phin after each use and let it air-dry fully to prevent a stale smell. Stainless steel models are easy to clean, while aluminum ones can discolor over time. If you are also using a countertop machine, the same routine applies to its carafe and basket, and our guide on How Do I Clean a Drip Coffee Maker: A Step-by-Step Guide for Beginners covers the basics. For machines with a water tank, see How to Clean a Drip Coffee Maker’s Water Reservoir for maintenance details.

If the drip slows noticeably, the grounds are probably too fine or packed too tightly. Loosen the grind a little and try again.

Common Mistakes

  • Using grounds that are too fine, which can clog the holes and stall the drip.
  • Pressing the plate too hard, which compacts the grounds and slows extraction.
  • Pouring water straight from a boiling kettle, which can make the coffee taste bitter.
  • Skipping the bloom step, which often leaves the coffee flat.
  • Leaving the phin wet between uses, which invites odors.

A stainless steel phin is a durable, easy-to-clean choice for daily use. View on Amazon

A small gooseneck kettle gives you steady control over water flow, which helps with the bloom. View on Amazon

A burr grinder produces the consistent fine grind a phin needs. View on Amazon

FAQ

Can I use a regular drip coffee maker instead of a phin?

You can, but the flavor will be lighter and less concentrated than traditional Vietnamese coffee. Using extra grounds and a stronger brew setting helps.

How much coffee should I use in a phin?

A typical starting point is about 2 tablespoons, or roughly 10 to 12 grams, for one cup. Adjust up or down to suit your taste.

Why is my phin dripping too slowly?

The grind is most often too fine or the grounds are packed too tightly. Use a slightly coarser setting and avoid pressing hard.

Conclusion

A vietnam drip coffee maker is simple, inexpensive to run and gives you full control over strength and sweetness. Start with a medium-fine grind, bloom the grounds, and let the drip do its work. With a few brews, you will know exactly how you like it.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our coffee machines guides, checking product details against manufacturer specifications and owner feedback.